Common rated voltages of electric vehicle batteries are: 48V, 60V and 72V.
Take lead-acid batteries as an example: generally, a battery is 12V (i.e. battery model starts with “6-”). The common 48V battery on the market is composed of four batteries. 60 V is made up of five batteries; 72 V is made up of six batteries. Of course, there are also specially shaped 16 V batteries (i.e. the battery model starts with "8-"). Similarly, if four batteries are combined, it will be 64V.
Recommended brands of lead acid batteries for electric vehicles: Changxin battery, Shinhwa battery, Mantingfang battery.
The first step: connect your own mesh bag and water line to the output terminals of the fish device respectively;\r\n 1. How to connect the mesh bag: Mesh bag The ring connected to the outlet line should use dconductors with good conductivity (such as copper rings and aluminum rings, steel rings are generally not very good, the ring diameter of the mesh bag is better about 16cm (depending on the ) ;fish size, you can adjust it yourself (decision), fish too small to float cannot be caught, and fish too big to enter can easily escape again\r\n 2. How to connect the water pipe: It is better to connect the water pipe to a coated copper wire or an aluminum wire with better conductivity. The diameter of the wire is preferably larger. Remove a bare wire. about 50. -90 cm and drag it under water (the picture shows a stripped wire with a diameter of 1 cm or about 0.75 square meter and 50 cm stretched). n 3. Finally, I would like to remind everyone that the water line and the mesh bag should not be connected upside down.The output of the fish device is connected to the mesh bag and the negative pole is connected to. the water pipe. Because fish all have positive tendencies, if the fish is poorly connected, it will swim in the opposite direction of the mesh bag and will not be able to catch the floating fish. \r\nStep 2: Find the corresponding outlet and plug in the manual switch or foot switch. There is nothing to explain about this. \r\nStep 3: Connect the input ends of the fish device to the battery or lithium battery, respectively. Some fish machines are equipped with 12 V and some are equipped with 24 V. We must understand this clearly from the trader before purchasing the machine. The two ends of the input cannot be connected backwards. The positive pole of the fish machine is connected to the positive pole of the power supply, and the negative pole is connected to the negative pole. If you buy a machine without preverse connection protection, The fish machine will be burned if you press the switch when connected reversely. However, there are fish traps. If they are connected backwards, they will not work. . No matter how they are connected, they will not burn. \r\nStep 4: Press the switch of the fish trap to start working. \r\nStep 5: It should be noted that when the machine is working, do not touch the outlet ends of the fish trap with both hands at the same time to avoid accidents.