The formula for calculating battery power is: battery power = battery capacity (unit: ampere-hour) × battery voltage (unit: volt).
This formula is based on the unit conversion of electricity. In the world of electrical energy, the units we usually use are watt-hour (Wh) or watt-hour (kWh), which represent 1/1000 and 1/1000000 of watt (W) and kilowatt-hour (kW), respectively. Therefore, if the battery capacity is 100 amp-hours (Ah) and the voltage is 12 volts (V), then its rating is:
Battery rating = 100 Ah × 12 V = 1200 Wh = 1.2 degrees.
This formula can also be used to compare the energy storage capabilities of different types of batteries. For example, if a lithium-ion battery has a capacity of 200 amp-hours (Ah) and a voltage of 3.7 volts (V), then its rating is:
Battery ratinge = 200 Ah × 3.7 V = 740 Wh. = 0.74 degrees.
The impact of batteries on the environment:
1. Resource Consumption: Battery production requires the consumption of a large amount of rare metals and minerals. resources, such as lithium, cobalt, nickel, etc., the extraction and processing of these resources will cause certain harm to the environment.
2. Power Consumption: Batteries must consume electrical energy when charging. The production of this electrical energy will also consume fossil energy, such as coal, oil, etc., as well as the greenhouse gases and pollutants they emit. will also have an impact on the environment.
3. Waste Disposal: Batteries need to be recycled and disposed of after use, which will produce a large amount of waste batteries if not handled properly, it will cause pollutionution and damage to the environment. In particular, heavy metal substances contained in used batteries will penetrate the soil and contaminate groundwater, thereby indirectly threatening human health throughout the food chain.
4. Increased vehicle weight: Electric vehicle batteries are heavier than the power system of traditional vehicles, which will increase the overall weight of the vehicle, reduce its fuel efficiency, and also cause some damage to infrastructure such as roads and bridges. Stress and injuries.
How many Ah is 1gWh of lithium battery?
The battery capacity is divided by the charging current, then multiplied by the coefficient 1.2. hours.
Note: Typically, the battery capacity is listed on the battery in milliamps. The higher the value, the greater the capacity. For example: 1200 mAh smeans the battery capacity is 1200 mAh. At the same time, chargers are usually marked with the charging current, also in milliamps.
For example: battery capacity is 1200 mA, charger charging current is 600 mA, charging time is (1200 mA/600 mA) × 1.2 = 2.4 hours, then this battery uses this charger charging time is 2.4 hours.
Note: The above calculation method does not apply to new batteries.
The battery charging time can be calculated using the formula : battery capacity/charging current*60. For example, the battery is 2500 mA and the charging current is 500 mA, then 2500/500*60 = 300 minutes. calculated. In fact, this is only a theoretical time and charging may take longer, because this charger does not charge at constant current. That is, as the charging time increases, the charging current will decrease relativeively.
Generally speaking, there will be no problem after 8 hours of charging. When charging, you can touch the surface of the battery with your hand. There will be a slight warmth, which means the battery is well charged. The highest charging voltage of a 1.2V nickel-metal hydride battery is around 1.4V. You can use a multimeter to check if it is fully charged. This charger takes the same time to charge one battery as it does to charge multiple batteries because its outputs are independent of each other. Take a look at the 1.2V-500mA*4AA 500mA*2AAA output, which shows that this charger has four independent 500mA outputs.
There is no voltage amplitude and cannot be converted. The dimensions of the two physical quantities are different.
Assume a 60 volt battery. 1 GWh of lithium battery is equal to 16,666,666.667 Ah.
1GWH=1000000KWH=1000000 kWh=x×60×1×3600
1000000×3.6×10^6=60×3600×x
x = 3.6×10^12÷(60×3, 6×10?)=16,666,666.667
Detailed information:
1GWH=1 000 MWH=1,000×1,000KWH=1,000,000 kWh=1,000,000×3.6×10^6 Joules=3.6×10^12 Joules.
Voltage 60 volts, 1 hour, current 16,666,666.667 A operates = 60 × 16,666,666.667 × 3600 = 3.6 × 10^12 Joules.
The kilowatt hour or kilowatt hour (symbol: kW·h; often abbreviated to degree) is a unit of energy measurement which represents the energy consumed by a device with a power of one kilowatt after a hour of use.
The unit "kilowatt hour" is mainly used to measure electricity, because "kilowatt hour" is easier for the public to understand than joule, and it is easier to convert to hours of electricity. use of electrical appliances. On the other hand, the unit of measurement of the joule is too small compared to the "kilowatt hour", which makes its calculation difficulthere. In mainland China, some public institutions also use "megawatt hour" instead of "kilowatt hour" on their billing sheets. In Chinese, “kilowatt” is sometimes written _.
1kW·h = 3,600,000 joules = 3.6 million joules.
1GWH=1 GeeWatt-hour = 10^9 Watt-hour = 10^6 kilowatt-hour.
The work done by the current per unit of time is called electrical energy. It is a physical quantity used to express the speed of consumption of electrical energy. It is represented by P. Its unit is the Watt, called “Watt”, and its symbol is W.
As a physical quantity which represents the speed of the current carrying out work, the power of an electrical appliance is numerically equal to the electrical energy it consumes in 1 second. If electrical energy "W" (SI unit is J) is consumed over a period of time as long as "t" (SI unit is s), then the electrical power of thatt electrical appliance is P = W/t (definition formula). The electrical power is equal at both ends of the conductor. The product of voltage and current flowing through a conductor.
P=U·I. For purely resistive circuits, the formulas P=I?*R and P=U?/R can also be used to calculate electrical power.
Every electrical appliance has a normal operating voltage called rated voltage. The power of the electrical appliance which operates normally at the rated voltage is called the rated power. is called the real power.
The amount of work done by the current is related to the size of the current, the voltage level, and the duration the power is on. The higher the voltage applied to the electrical device, the greater the current flowing through it, the longer the turn-on time, and the more work the current does. Research shows that when the voltage at the bornes of the circuit is U, the current in the circuit is I and the power-on time is t, the electrical power W (or the power consumed) is: W=UIt.
Baidu Encyclopedia - kilowatt hour
Baidu Encyclopedia - Electric Power
Baidu Encyclopedia - Electric Power