What type of battery does the Logitech G304 use?
Logitech G304 is a wireless gaming mouse that uses AA batteries for power. Specifically, the G304 can use the following battery types:
Alkaline Batteries
Alkaline batteries are the most common battery type and one of the officially recommended battery types for the Logitech G304. This type of battery is cheap, easy to buy, and has a long lifespan, but it must be replaced in time once it runs out, otherwise it may damage the device.
Rechargeable batteries
In addition to alkaline batteries, the G304 can also use rechargeable batteries. This type of battery can be recharged again and again, lasts longer than alkaline batteries and is also more environmentally friendly. However, it should be noted that the voltage and capacity of rechargeable batteries may vary, so you should choose a suitable model.
Lithium battery
The Logitech G304 can also use lithium batteries. This type of battery is small in size, light in weight, has a long service life, and can be charged and discharged repeatedly without causing pollution to the environment. However, due to the high voltage, a special charger is required for charging, otherwise it may damage the device.
In summary, the Logitech G304 can use alkaline batteries, rechargeable batteries, and lithium batteries. Different types of batteries have their own advantages and disadvantages, and users can choose the appropriate battery type according to their own needs and actual conditions.
How to change the battery of Logitech wireless mouse
GP is a Singapore brand Kingsoft
Duracell is an American brand.
Not the same brand.
But both are good in non-rechargeable batteries.
GP has a good share in hyd fieldnickel metal rust (Ni-MH).
But. The current lithium battery industry started late and lags behind other lithium battery manufacturers.
A method to replace the wireless mouse battery 1. The computer reminds the mouse that the battery voltage is low and the battery needs to be replaced or recharged. At this time, the battery must be replaced. 2. Find a safe place to prevent the mouse or battery from falling to the ground, then turn the mouse over and turn off the mouse switch. There is a circular structure about 5mm behind the mouse, which is the laser output, and a black rectangular structure about 10mm long and 2-3mm high, which is the battery cover switch. 3. Gently press the switch along the mouse surface toward the center of the mouse. Click, the switch opens and the battery cover pops gently to see the battery.4. Remove the battery, pay attention to the installation direction of the battery, then charge the battery or replace it with a new one. 5. Install the polarity of the rechargeable batteries or new batteries. Insert the battery into the mouse, then gently install the battery cover, then gently press the battery cover to turn on the mouse.