1. Use a screwdriver to remove the two screws on the bottom of the iPhone 6s.
2. Use the suction cup tool to separate the front and back panels.
3. After opening it, comparing it with iPhone 6 (left), you will find that the battery size of iPhone 6s is slightly smaller and a new Taptic Engine feedback motor is added below below. the battery to connect the screen and the motherboard. The number of lines has been reduced from four to three.
4. Use a pry bar to remove the cable.
5. The display cable is also covered with metal shielding. Remove the shield and use a pry bar to remove the cable.
6. Although 3D touch is added, the iPhone 6s' screen cables are reduced from four to three. The glue on the new iPhone is really strong, and you can see a strip of glue on the top edge of the screen.
7. Continue disassembly. This is the Taptic Engine feedback enginewhich appears for the first time in the iPhone.
8. The Taptic Engine feedback engine, the experience is similar to the ForceTouch trackpad on Macbook. The Taptic Engine feedback engine can give everyone a real pressing feedback experience.
9. Use tweezers to gently peel off the battery cable.
10. Remove the adhesive from the bottom of the battery.
11. Remove the battery, replace it with a new one and reseat the phone.
What should I do if my cell phone battery is not durable? .
Most of the recently launched Samsung mobile phones have built-in batteries and these cannot be removed.
If your mobile phone supports battery installation/removal, we recommend that you refer to the following operations:
1 Find the "notch" first " on the side or bottom of the phone. mobile phone back cover and hollowez with your nails. Open the back cover and remove the battery.
2. When installing, first align the battery contacts with the battery slot contacts, then insert them. Place the back cover and press firmly on all sides.
Note: The opening position of the back cover is not exactly the same for different mobile phone models.
What does it mean that the mobile phone has a built-in battery, that is, the battery cannot be replaced or removed
If you are using a vivo mobile phone, there are more and more more scenes where you need to use the mobile phone in your daily life. Energy consumption is mainly. related to the working status of the mobile phone, such as playing games, watching videos and live broadcasts, making video calls and chatting, running a large number of programsera-plan, etc. Scenes will consume more power the higher the phone's brightness; Mobile phone screen, the higher the volume or the use of data networks, the longer the usage time, the greater the power consumption will be.
To reduce energy consumption, it is recommended to apply the following methods:
1. Common usage scenarios, such as using social software and listening to music. , reading novels, etc., have an impact on the network speed. It is recommended to use 4G data network in low demand scenarios. When you need a faster 5G network to play games or download files at high speed, restart.Using the 5G data network can effectively extend battery life;
< p>2. When playing games, watching videos and live broadcasts, reduceappropriately screen brightness and volume;3. Reduce the image quality and frame rate appropriately. For models with high refresh rates, you can set it to a normal refresh rate to reduce power consumption
4. Clean unnecessary programs in the background and use “a; -click acceleration" more often. Function;
5. When GPS positioning, Bluetooth and other functions are not used, you can turn off the function to reduce power consumption;
6. Enter Settings – Battery and choose to enable power saving mode according to your needs, super power saving mode or sleep mode
How to remove the battery from Huawei mobile phone
The so-called built-in battery generally refers to the battery packaged inside the mobile phone, and the mobile phone does not use a removable shell, the battery cannot be directly removed and replaced.
As for the battery inside the mobile phone, it is packaged independently and exists independently in the body. However, if it needs to be taken apart, it must be taken apart.
You can see that there is no independent battery compartment design. To replace the battery, you can only disassemble the phone. If you do not have enough practical skills, you can send it to a service center or repair shop.
Detailed information
Tips on mobile phone battery maintenance
1. Don't wait for your mobile phone battery to start.for alarm and shows that it is running out of battery. I just went to charge my phone. Generally, you should charge your phone when the battery level is only around 30%.
2. When charging your mobile phone, do not charge it too fully. Don't flush the toilet for too long either. As long as the phone says it's full or reaches around 90%, you can stop charging.
3. Mobile phones are all lithium batteries. Lithium batteries are sensitive to heat and are usually exposed to direct sunlight. It is also best to stay away from heat sources in ordinary times. When charging your phone, do not play with it while charging.
4. Try to use original chargers and do not mix chargers frequently. This would not only damage the mobile phone battery, but also reduceent its lifespan. And that can easily cause an explosion.
5. Smartphones have many functions. It is very convenient to use, but it also consumes a lot of power, so unused software or functions should be turned off in time.
6. Touchscreen mobile phones sometimes do not work. Can be turned on and restarted. In normal times, especially in spring and autumn, when there is a lot of static electricity, you should pay attention to removing the static electricity from your hands in time before playing with your mobile phone.
1. Huawei mobile phones usually have built-in batteries and cannot be replaced. If you feel the battery is abnormal during use, please back up your data in advance and take your purchase invoice or warranty certificate to a Huawei authorized service center. Ask Dem Professionalsremove and replace it. Disassemble and replace it privately to avoid damage to the phone.
2. You can check the "Repair Parts Price" and the nearest "Huawei Customer Service Center" through the mobile phone service or membership service app and the official website.
Detailed information
Mobile phone lithium battery charging method:
For "activation lithium battery" "Problem, many people say that the charging time should be more than 12 hours, and a full charge and discharge should be repeated three times in order to activate the battery. the first three charges require more than 12 hours” concerns rechargeable batteries from the 1990s. Nickel-cadmium batteries then had a memory effect and had to be fully charged to guarantee the battery capacity
.The mobile phone uses a lithium-ion battery, which has no memory effect and can be fully charged in 2-3 hours. A full charge is enough. If the new battery is charged and discharged for 12 hours or more during the first three times, it will seriously damage the battery and may cause it to swell or even burn. Fortunately, the cell phone and charger have protection circuits when charged to 100%, they automatically turn off the power and do not continue charging when plugged into the charger. However, it is better to unplug the charger at this time to avoid overcharging the battery in case there is a problem with the charger's protection circuit, causing serious damage to the battery material and affecting its capacity and lifespan. life. Usually, the charging method described in the mobile phone manual is the standard charging method suitable for tmobile phone.
Reference materials:
Baidu Encyclopedia-Mobile phone battery