When charging a general 48V 20AH battery, it requires approximately 1.08 kilowatt hours of electricity per charge once it is fully discharged. The general charging time is 8-10 hours, which is the power consumption per charge. The hour of charging represents 0.1 to 0.14 kilowatt hours of electricity.
The amount of electricity charged into an electric vehicle battery is typically 1.05 times the discharged capacity of the battery. Calculated based on charging voltage, power consumption = charging voltage * nominal battery capacity * 1.05. lithium battery.
Precautions for charging lithium batteries
New batteries generally need to be activated. After the battery is left for a period of time, it will enter a sleep state. the capacity is lower than the normal value and the usage time is also shortened. Activation is therefore necessaryarea. The lithium battery activation method is very simple. It only takes 3-5 normal charge and discharge cycles to activate the battery and restore its normal capacity.
Lithium-ion batteries are afraid of high temperatures. Prolonged exposure to overheated environments will significantly shorten the life of lithium-ion batteries. In severe cases, an increase in internal pressure can cause an explosion. Even if there is no explosion, lithium-ion batteries will be quickly discarded in high heat. Most of the reasons are due to their working environment caused by high temperatures.
A charge cycle of a cell phone lithium battery refers to the discharge of electricity to reach the capacity of the battery. No matter how many times it is charged and discharged, as long as the total discharge does not reach 100% of the rated capacity, one cyclee life is not consumed. Only when the discharge reaches 100% capacity will the next cycle be calculated. , which is not directly linked to whether recharging is frequent or not.
For example, if a 1000 mAh lithium-ion battery is charged 10 times and the total amount of discharge during these 10 intervals is 1000 mAh, then only one charge and discharge cycle must be calculated if only the load. once, but this time the battery is fully charged and the discharge is also 100% to 0%. The total discharge amount is 1000mAh, which is also counted as one charge and discharge cycle.
Detailed information:
When you use a digital device, you can charge it and unload it once for the first time. After a complete charge and discharge cycle, the battery can be checked for possible problems,then it can be used normally without being limited by the number of charges and charging time. Avoid running out of battery during use and charge the device as soon as possible when the battery is below 15%.
When charging the device, there is no need to charge it every time, and there is no need to connect the charger for a long time after charging. Of course, as long as power is present in the area. is stable, you can charge it at night. After all, overnight is more than enough to fully charge the battery.
Zhongguancun——Digital aspects: too many rules damage mobile phone batteries