Methods for reactivating lithium batteries are: use a charger at a fast charging station, use a high-voltage charger, and turn on the headlights before charging.
1. Use the charger from a fast charging station to charge: Lithium batteries tend to lose power if left for a long time. If you want to activate them, you can directly press the button. electric vehicle to a fast charging station on the street, find such a charger to recharge. The current in such places is usually relatively large, and the battery can be activated quickly, then it can be replaced with a corresponding charger and continue to be fully charged.
2. Use a high voltage charger to charge: Find a high voltage charger to charge the low voltage lithium battery. Normally, it is best to usea charger suitable for the battery, which is better for the battery. However, if the lithium battery cannot be charged due to power loss, you can use a high voltage charger to charge it to activate the battery.
3. Turn on the headlights when charging, then recharge: If the scooter is left without a charge for a long time and the lithium battery is "starving", you can turn on the headlights while charging, then recharge. Connect the charger and see if the charging light on the charger changes. If so, it can charge normally.
Advantages of lithium batteries
1. Lithium batteries have a relatively long lifespan, with a lifespan of more than 2,000 times. Under the same conditions, lithium batteries can be used for 7 to 8 years.
2. Lithium batteries are relatively safe to use. Lithium batteries have sufferedstrict safety testing and will not explode even in a traffic accident.
3. Lithium batteries charge quickly. Using a dedicated charger, the battery can be fully charged at 1.5°C in 40 minutes.
4. Lithium batteries are resistant to high temperatures, and the hot air value of lithium batteries can reach 350-500 degrees Celsius.
5. Lithium batteries have a large capacity and have no memory effect.
6. Lithium batteries are green, environmentally friendly, non-polluting, have many raw material sources, and are cheap.