Tip: The ribbon required for the transformer can be determined based on the designer's needs. There are mainly three types of tapes used: insulating tape, Mylar tape, and copper foil tape. The ribbon required for the transformer can be determined based on the designer's needs. There are three main types of tape used: electrical tape, Mylar tape, and copper foil tape. 1. Insulating tape: mainly used in places such as between windings and core outsourcing of transformers. 2. Mylar Tape: Also called Mylar Tape, Fire Tape and Silicone Mala Tape, this is a single-sided adhesive tape. It is widely used in the insulating packaging of various types of motors and electronic components such as transformers, motors, capacitors and in high voltage insulation between the motherboard circuit and the case of power supplies.cutting. Mara tape is also used to wrap lithium batteries in flexible packaging. For example, the winding between the protection plate and the battery core will play the role of fixation, insulation and flame retardancy. 3. Copper foil tape: the purity is above 99.95%. Its main function is to eliminate electromagnetic interference (EMI), isolate the damage caused by electromagnetic waves to the human body, and avoid unnecessary voltage and current that affect the function.
What type of tape is needed for the transformer
Introduction What type of tape is needed for the transformer? Tip: The tape needed for the transformer can be determined based on the designer's needs. Mainly use insulation tape, Mara tape, copper foil tape.